Auxiliary Tester - Voltage&Temperature
Auxiliary Tester generally used in testing battery surface temperature and cell voltage in battery module/ Pack.
The voltage& temperature value can be read in same testing data while the main test are processing.
The voltage& temperature value can be read in same testing data while the main test are processing.
Voltage
0~5V(10V/20V can be customized)
Temperature
Thermistor/ Thermocouple
Voltage
Voltage: | 0~5V |
Accuracy: | 0.05%FS |
Temperature: | Thermistor |
Range: | -30℃~120℃ |
Accuracy: | ±1℃ |
Resolution: | 0.1℃ |
Channels: | 8 |
Voltage: | 0~5V |
Accuracy: | 0.05%FS |
Temperature: | Thermocouple |
Range: | -70℃~260℃ |
Accuracy: | ±1℃ |
Resolution: | 0.1℃ |
Channels: | 8 |
How does the Aux-Tester connect to the main Neware tester?
Connected with RS485 port by using network cable
If you have Neware battery tester like 5V10mA/ 5V6A/ 5V12A, etc. You can add the the aux-tester one by one.
If you have high power Neware battery tester. You also can add the the aux-tester. ex. if you have 32 channles 5V30A battery tester, so you need 4 unit aux-tester to test; if you have two channels 100V100A battery tester which you are going to test 20S40P battery pack, so you need 15 unit aux-tester to test cell voltage and surface temperature (without BMS communication), and the you will have a rack to put multi aux-testers as picture shows.
How to map Aux-Tester channels in Neware softeware?
