Mini Constant Tempearture Chamber
Neware Constant Temperature Test Chamber aims to test battery performance under constant temperature by simulating room temperature condition. it can analyze and evaluate whether the battery can meet required international standard and provides a good reference in product R&D stage. What's more, it’s widely applied on Electronics, Telecommunication, Automobile, Packaging, Aerospace, Electric products, Pharmaceuticals industry, etc.
Aim to battery test, neware testing software can control the battery tester and temperature chamber at the same time, in order to test best battery performance.
Different run program can be set according to different test process of battery performance. Then the battery tester and chamber will run automatic by setting. Reduce the human operation.
The chamber's build-in sensor will trigger an automatic alarm when it detects abormal conditions. The chamber will protect and shutdown, then send the alarm information to the assigned terminal. (Optional)
Independent development the temperature control module in the electronic control system by Neware. Improve the control accuracy of temperature.
Temperature Range
0℃~60.0℃
Cooling Time
25.0℃→0℃(≤50min)
Temperature Fluctuation
≤1.0℃
Heating Up Time
25.0℃→60.0℃(≤30min)
Temperature Deviation
≤±2.0℃
Fuzzy PID Controller Algorithm
Constant Temperature Quickly
Cooling Mode
Forced Air Cooling
Support Coin Cell Channels
4×8CH(32CH)
Mini Desk-top Constant Temperature Chamber with Neware mA coin cell battery tester
Generally used with 5V10mA/ 5V20mA/ 5V50mA Neware coin cell battery tester. Maximum supported to 32 channels connected.
Mini Constant Temperature Chamber-25L | |||||||
Mode | MHW-25 | ||||||
Standard Inner Capacity | 25L | ||||||
Interior Dimension W*D*H(mm) |
280*250*360 | ||||||
Exterior Dimension W*D*H(mm) |
360*450*500 | ||||||
Sample Trays Number | 4 | ||||||
Cooling Mode | Semiconductor Refrigeration |
Image of Temperature Field
Image of Speed Field
Data Information Flow/ Connection
Neware environmental testing chamber connect with our Neware tester via TCP/IP port. Using Neware software to control all.