HPPC (Hybrid Pulse Power Characterization) test is intended to determine dynamic power capability over the device’s useable voltage range using a test profile that incorporates both discharge and regen pulses. For more information, you can visit below file: http://avt.inl.gov/battery/pdf/PLUG_IN_HYBRID_Manual%20Rev%200.pdf which has elaborate explanation and how data gets summarized.
1, Since HPPC has pulse and DCR calculation, suggest you have our BTS 4000 or newer technology to bring out such test. And there is relative long time stand by, so conditional record will help you record necessary data but not expand the testing result data. Below steps settings assumes you already have fully charged the battery.
Step-Settings-for-HPPC-Test
2, Below file goes the testing result. This result has no relationship with the steps set above. It comes from another similar test.
HPPC-Test-Result