Tuesday, 03 January 2017 13:03

Get to know NEWARE

About Neware

Founded in 1998, Neware Technology Limited is committed to providing high-performance battery testing solution for global battery manufacturers, new energy vehicle manufacturers, energy storage suppliers, national quality inspection departments, universities and scientific research institutions. We have provided the battery charge and discharge solution for more than 26,000 customers. Our goal is to build the best reliable and flexible battery testing solution and to contribute the advance of the new energy industry.

  • Vision Sustainable Future
  • Core Value Safety & Health, Environment protection, Esteem and Self-respect
  • Mission To achieve sustainable development through technology integration and lean production
  • Plan and Development To be the world-class supplier for battery testing and power management equipment

Products

  • BTS 4000 This series is an updated version of BTS 3000. It provides higher data acquisition frequency up to 100Hz to enable you get reliable DCR (Direct Current Resistance) tests. And also it has a faster system output response and more accurate when compared with BTS 3000.
  • BTS 8000 BTS 8000 is designed for EV (Electric Vehicle) drive cycle simulation, providing faster system response than BTS 4000 and multi current ranges enabled to ensure high current or power accuracy.
  • BTS 9000 This series is our sophisticated series for battery or material research solutions. It characterized with a data acquisition frequency up to 1000Hz, an accuracy of 0.02% FS and a minimum pulse width of 400us (microsecond) which can be utilized for GSM or some other rapid pulse tests.
  • BTS ES In most cases, discharged power from batteries is released as heat spread in air in vain. Our ES (Energy Saving) system enables feedback this fraction of power into electric circuit or electricity grid. 
  • EVT 6000 This series is a testing solution for those energy devices with high voltages and high power such as battery module or pack. CAN (Controller Area Network) is supported to get data from BMS (Battery Management System).

  • CE-7000 While EVT 6000 uses thyristor, EVT 7000 uses IGBT and efficiency and in smaller space.

We provide not only above presented major products, but also calibration system, system integrat ion solutions, testing services and software development such as BIS (Battery Information System) to manage battery production information and LIMS (Laboratory Information Management System) to manage testing activities in a laboratory.

  Features Application
BTS-4000

Accuracy: 0.05% of FS for BTS 4000 ; Data

Acquisition frequency :up to 10Hz for BTS 4000


Capacity / Cycle Life

Pulse / DCR / HPPC+ BTS 3000 applications

BTS-8000 Auto current ranges, 0.05% of FS; Data

Acquisition frequency: up to 100 Hz

Drive cycle simulation + BTS 4000

applications

 
 BTS-9000  

Accuracy: 0.02% of FS; Data acquisition

Frequency: up to 1000 Hz Minimum

Pulse width: 400us;

GSM Pulse / Cyclic voltammetry 
 CE-7000  

Accuracy: 0.1% of FS for EVT 7000; Data acquisition

frequency: 10 Hz; CAN supported; Electricity feedback

Capacity / Cycle life for battery module or pack

 
 BTS-ES  

Energy saving rate >55% ;

PF (Power Factor)≥0.98;

THD (Total Harmonic

Distortion)≤5%

 Capacity / Cycle Life

 

 

System Architecture

All Neware testing equipment could be deployed via TCP/IP, providing flexibility, data security and integrity. For some agile testing solutions and calibration, RS232 or RS485 protocol is also used. Our setting in this manual is for the equipment deployed via TCP/IP.

neware battery tester-System-Connection-Mode

System Connection Mode

 

neware battery tester-System-Architecture

System Architecture

 

Read 3201 times