More Focused, More Professional!
BTS-4000 Series 5V6A/ 5V12A Battery Tester
BTS-4000 series entered into market in the year of 2008. Now it is one of the most successful and most popular battery testing system in China and World. Thousands of battery manufacturers, battery research institutes and laboratories use it as their primary testing partner for their various testing activities.
Due to the rapid data acquisition frequency, BTS-4000 could be applied to super capacitor or EDLC (Electronic Double Layer Capacitor) test. Through our advanced software, the capacitance, DCIR(Direct Current Internal Resistance) could be easily calculated.
Due to the rapid data acquisition frequency, BTS-4000 could be applied to super capacitor or EDLC (Electronic Double Layer Capacitor) test. Through our advanced software, the capacitance, DCIR(Direct Current Internal Resistance) could be easily calculated.
Accuracy
0.05%FS
Min. Pulse Width
500ms
Data Acquisition Frequency
10Hz/ 100Hz
DCIR
DCIR =△V/△I
Response Time
≤1ms
Multi Range
Triple Range
Born for Test
What's the 5V6A/ 5V12A battery tester's range?
| 5V6A | |
| Range 1: | 100mA |
| Range 2: | 3A |
| Range 3: | 6A |
| 5V12A | |
| Range 1: | 1A |
| Range 2: | 6A |
| Range 3: | 12A |
How to understand the triple range for Neware battery tester?
If you have neware 8 channels 5V6A battery tester with triple range.There will be triple range as below:
Range1: 0.5mA~100mA; Range2: 100mA~3A; Range3: 3A~6A.
Example: Using 50mA current to charge/discharge, the actually current should not be 50mA, it should has deviation value base on the range. If you have older 5V6A tester which has single range, so the output current will be 47mA~53mA. It has 3mA deviation value (3mA=6000mA*0.05%); If you have triple range 5V6A battery tester, so the output current will be 49.95mA~50.05mA.(The 50mA current output in the first range). It has 0.05mA deviation value (0.05mA=100mA*100mA). It highly improve the accuracy when you set different current.
The same with 5V12A or other multi range Neware battery tester.
Range1: 0.5mA~100mA; Range2: 100mA~3A; Range3: 3A~6A.
Example: Using 50mA current to charge/discharge, the actually current should not be 50mA, it should has deviation value base on the range. If you have older 5V6A tester which has single range, so the output current will be 47mA~53mA. It has 3mA deviation value (3mA=6000mA*0.05%); If you have triple range 5V6A battery tester, so the output current will be 49.95mA~50.05mA.(The 50mA current output in the first range). It has 0.05mA deviation value (0.05mA=100mA*100mA). It highly improve the accuracy when you set different current.
The same with 5V12A or other multi range Neware battery tester.
How to understand the minimum discharge voltage for Neware battery tester?
As to Standard model for 5V6A/ 5V12A Neware Battery Tester, they has standard minimum discharge voltage as below:
5V6A: 1.0V (by using cylindrical clamp); 1.5V (with 2.0m length of testing cable)
5V12A: 2.0V (by using cylindrical clamp); 2.5V (with 2.0m length of testing cable)
Need lower minimum discharge voltage? Don't worry, Neware still can do this. Neware special power supply to support down to 0V~
5V6A: 1.0V (by using cylindrical clamp); 1.5V (with 2.0m length of testing cable)
5V12A: 2.0V (by using cylindrical clamp); 2.5V (with 2.0m length of testing cable)
Need lower minimum discharge voltage? Don't worry, Neware still can do this. Neware special power supply to support down to 0V~
How to understand the fixture of Neware battery tester?
Neware offer various different clamps to meet the different batteries, so our user can easilier to connect your battery and focus on battery testing.
As to 5V6A & 5V12A Neware battery tester, they have same clamps for cylindrical clamps, air-plug(connect aligator clamps or polymer clamps). The cylindrical clamp has adjustable height. You just use the straight screwdriver to adjust height, even use a coin. Wonderful, right?
As to 5V6A & 5V12A Neware battery tester, they have same clamps for cylindrical clamps, air-plug(connect aligator clamps or polymer clamps). The cylindrical clamp has adjustable height. You just use the straight screwdriver to adjust height, even use a coin. Wonderful, right?
Various types of batteries to be test
Different clamps can be supported.
Coin cell clamps
Cylindrical holder
Pouch Clamps
Alligator Clamps
Ring nose connector
Easy and convenient to check testing data, help you analysis data quickly!
(Voltage, Current, Capacity, DCIR, HPPC, Cycle Life, etc. )
(Voltage, Current, Capacity, DCIR, HPPC, Cycle Life, etc. )
Not only the cylindrical battery can be test, but also Neware tester can test the pouch battery.
Special design fan, to make sure all tests are good. Prevent over high temperature.
CT-4008T-5V6A-S1
CT-4008T-5V12A-S1
Neware Tester Running Test on Site
